Thermally Activated Adhesive (Therma Cure)

DESCRIPTION

Product: Thermally Activated Adhesive (Therma Cure)

Indication: For use in dental clinics

Specification: 1 tube, 5g

Manufacturer: Reliance
Country of Origin: USA

Features:

• Designed for indirect bonding of brackets activated by heat

Instructions for Use:

1. Prepare the dental model with proper isolation.

2. Apply a uniform layer of Therma-Cure™ on the bracket base and place onto the tray.

3. Position the bracket on the plaster model and adjust as needed.

4. Press to remove excess adhesive and clean around the bracket.

5. Once all brackets are in their final positions, place the model in an oven at 325 °F (163 °C) for 15 minutes. (Ensure oven temperature is checked with an oven thermometer.)

6. Remove the model and allow it to cool. Therma-Cure™ will be fully polymerized and ready for indirect bonding tray fabrication.

Precautions:

• Unpolymerized resin may cause skin irritation in sensitive individuals. Wash thoroughly with soap and water if contact occurs.

• If contact with eyes occurs, rinse immediately with plenty of water and seek medical attention.

• For contact with other tissues, rinse the affected area thoroughly with water for several minutes.

Storage: Store at room temperature (15–30 °C).